NordicTrack Treadmills can vary in model style and while the model used in this repair example may not look exactly like your treadmill, the procedure demonstrated here is very similar. Always unplug the treadmill from the outlet before working around any moving or electrical components. If you need to use power while diagnosing an issue, please use caution.
Parts needed:
Motor Hood Removal Steps:
- Remove Side Screws
- Remove Front Screws
- Remove Motor Hood
Locate and remove the motor hood screws along both sides of the motor hood.
Find and remove the screws along the front of the motor hood.
Lift the motor hood up and out to remove it.
These steps are necessary when replacing a treadmill motor on a NordicTrack treadmill and when replacing a treadmill walking belt too. Please refer to either one of these guides depending on your NordicTrack service or repair that you may need to perform.
