Elliptical Service Service

How to replace an elliptical resistance motor

To access the resistance motor on an elliptical, you will need to remove a number of components. Be sure to unplug your machine before attempting this repair, and do not use power tools to make the repair. Parts and tools needed: New NordicTrack Elliptical resistance motor. Standard screw driver. Allen wrench. Elliptical resistance motor replacement […]

NordicTrack Elliptical bushing replacement
Elliptical Service Service

NordicTrack Elliptical bushing replacement

Over time and with constant use, an exercise machine’s bushings or bearings can wear out. A clicking or knocking noise that matches the rhythm of your movement can indicate a worn bushing. A grinding, scraping or scratchy noise could indicate a worn bearing. The procedure for replacing worn bushings or bearings is the same. In […]

7 Stepts to tighten an Elliptical Drive Belt
Elliptical Service Service

7 Steps to tighten an Elliptical Drive Belt

Parts you will need Allen wrench. Standard screw driver. Elliptical Drive Belt Tightening Summary Remove center and upright plastic covers Separate the upright arm and leg Remove left and right hand belt shields Remove left side covers and upright arm Tighten the elliptical belt Reassemble left side covers, arm and leg Reassemble right side covers, […]